铝合金集成墙面
Aluminum alloy integrated wall
1.保温、隔热
1. Insulation and insulation
经过国家保温性能的检测，安装房间和普通板安装的室内温度相差7度左右，和油漆相比相差10度左右，是南方夏天的炎热和北方寒冷的冬天墙体装饰的首选材料，铝合金集成墙面具有独特的隔热性能，使产品彻底对阳台、阳光房和别墅顶层的空间的阳光照射带来了解决方案。
After testing the national thermal insulation performance, the indoor temperature difference between the installation room and the ordinary board installation is about 7 degrees, and the difference is about 10 degrees compared with the paint. It is the preferred material for wall decoration in hot summer in the South and cold winter in the north. The aluminium alloy integrated wall mask has unique thermal insulation performance, which makes the product thoroughly bring sunlight to the balcony, sunshine room and the space on the top floor of villas. Solution.
2.防火
2. fire prevention
铝合金集成墙面通过国家级权威部门的检测，防火指数达到B1级，可以满足防火的要求，并且具有较强的坚硬度，可以使用在各个类型的墙上。
Aluminum alloy integrated wall through the national authority of the detection, fire index reached B1 level, can meet the requirements of fire prevention, and has a strong hardness, can be used in various types of walls.
3.防水防潮
3. Waterproof and moisture-proof
在木塑与铝合金集成墙面的对比中，铝合金集成墙面有着特殊的防潮性能，在潮湿的南方使用是再合适不过了。
In the comparison of wood-plastic and aluminium alloy integrated wall, aluminium alloy integrated wall has special moisture-proof performance, which is suitable for use in the humid south.
4.花纹细腻耐看
4. Fine and durable patterns
铝合金集成墙面的表面大部分都是使用滚涂的方法，粉末喷涂、覆膜、磨砂等几种表面涂层的，其花纹比较细腻耐看。
Aluminum alloy integrated wall surface is mostly rolled coating method, powder spraying, coating, grinding and other surface coatings, its pattern is more delicate and durable.
木塑集成墙面
Wood-plastic integrated wall
1.耐老化性能不够
1. Insufficient aging resistance
在木塑与铝合金集成墙面的对比中，木塑集成墙面比较适合在室内使用，由于木塑集成墙面在强光的照射下容易分解，木塑的耐臭氧性、耐水性和耐候性不高，所以使用于户外的较少，这样的产品对室外的运用寿命有限，耐热性较差，容易出现变型的现象。
In the comparison of wood-plastic and aluminium alloy integrated wall, wood-plastic integrated wall is more suitable for indoor use. Because wood-plastic integrated wall is easy to decompose under strong light, wood-plastic has low ozone resistance, water resistance and weather resistance, so it is less used outdoors. Such products have limited service life, poor heat resistance and are prone to variant phenomena.
2.韧性不好
2. Poor tenacity
木塑的韧性较低，所以在加工的时候，加工设备和加工模具都需要作出相应的调整使改造后能满足加工的要求。
The toughness of wood-plastic is low, so when processing, the processing equipment and the processing die need to make corresponding adjustments to meet the processing requirements after transformation.
3.导热性差
3. Poor thermal conductivity
在木塑与铝合金集成墙面的对比中，木塑集成墙面的导热性较差，使冷却定型效果比较困难，加工中需要频繁使用水冷来定型。
In the comparison of wood-plastic and aluminium alloy integrated wall, the thermal conductivity of wood-plastic integrated wall is poor, which makes the cooling effect more difficult. Water cooling is often used in processing.
4.表面黏结性较差
4. Poor surface cohesion
木粉具有着强极性和吸水性， 热塑性塑料多数是非极具有疏水性能的，两者之间的相容性较差，导致表面的粘结力减小。
Wood flour has strong polarity and water absorption. Most thermoplastics are non-hydrophobic, and the compatibility between them is poor, which leads to the decrease of surface bonding force.